Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
FTC Starter Kit V3.1
REV-45-3529€695,70The FTC Starter Kit V3.1 is the ultimate starting point for your team’s FIRST Tech Challenge season. Built based on feedback directly from teams, this kit is packed with essential REV DUO components... -
UltraPlanetary Gearbox Kit & HD Hex Motor
REV-41-1600€45,05The REV UltraPlanetary Gearbox Kit is the entry point into using the REV UltraPlanetary System. The kit comes with UltraPlanetary Cartridges to support six different final gear reductions ranging... -
15mm Pillow Blocks
€5,01 - €7,76This bearing pillow block bracket (REV-41-1317) is used with the DUO Build System 15mm Extrusion. The 9mm center hole is use with either the Long Through-bore Bearing (REV-41-1329) or the End Cap... -
M3 Nylon Unthreaded Spacers
€3,25M3 Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts on a M3 bolt. -
5mm Hex Spacers
€6,01 - €7,765mm Hex Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts along a 5mm hex shaft. Mix and match various spacer lengths to adjust... -
M3 Ball Joint Rod Ends
€13,51M3 Ball Joint Rod Ends are compatible with the REV DUO System. The Female M3 Ball Joint Rod End (REV-49-1560) can either be paired with its male counterpart to create short linkage arms or with M3... -
5mm Metal Hex Bore Gears
€9,76 - €10,015mm Metal Hex Bore Gears are compatible with the REV DUO System and work with REV 5mm hex shafts in high-load applications. REV metal gears are NOT compatible with REV plastic gears. All REV metal... -
5mm Plastic Hex Bore Gears
€5,01 - €8,765mm Plastic Hex Bore Gears are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
DUO Plastic #25 Sprockets
€5,01 - €8,76DUO Plastic #25 Sprockets are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
Motion Pattern Spacer - 8 Pack
REV-41-1846-PK8€5,51This Motion Pattern Spacer offers a convenient and accurate way to space gears, sprockets, wheels, and other parts through the Motion Pattern interface. Great for getting the proper spacing when face... -
15mm Linear Motion Kit V2 Hardware Pack
REV-45-1831€7,76This is all of the hardware included in the 15mm Linear Motion Kit V2 (REV-45-1507). Specifications Hole Diameter: M3 Clearance Kit Contents QTY 8 - M3 x 8mm Low Profile Socket S -
22 Tooth Plastic Right Angle Rack Gear - 8 Pack
REV-41-1503-PK8€11,01Make driving linear motion easy with the 22 Tooth Plastic Right Angle Rack Gear. Mount the rack gear to a slot in either the REV DUO Extrusion or REV DUO Channel while using any of the REV DUO... -
Polyurethane Round Belt - 6mm - 6ft
REV-41-1164€9,26Our Polyurethane Hollow Round Belting is perfect for your conveyor, and intake mechanisms. Use Barbs to assemble custom length belts. -
Shaft Collars - 10 Pack
REV-41-1327-PK10€9,76This shaft collar is compatible with the DUO Build System and is used to prevent gears, sprockets, wheels, and other parts from sliding out of place on a 5mm hex shaft. Shaft collars can also be used... -
Servo Shaft Adapter - 4 Pack
REV-41-1328-PK4€6,01The Servo Shaft Adapter makes it possible to drive a 5mm hex shaft with any 25T output servo including the Smart Robot Servo. The adapter attaches to the servo spline like any common servo horn and... -
UHMWPE Cords
€7,76 - €12,511.2mm UHMWPE Cord - 10M (REV-41-1162) is a high strength string for use with the small Pulley Bearings and the 15mm Linear Motion Kit to create a powered lift. 3mm UHMWPE Cord - 10m (REV-29-1244 -
Replacement Gear Set for Smart Robot Servo V2
€13,51Complete gear set replacement for the Smart Robot Servo V2. Documentation Smart Robot Servo V2 Overview -
Servo Gear Adapter - 4 Pack
REV-41-1364-PK4€6,01This Servo Gear Adapter is a 15 Tooth Plastic Gear that attaches to any 25T output servo including the Smart Robot Servo. Warning: Gears from other building systems may have a very similar tooth... -
DUO Metal #25 Sprockets
€5,01 - €12,51Metal sprockets designed to work in high-load applications with #25 chain. This sprocket requires a hub like REV-41-1719. Specifications Chain Size: #25 Material: 6061... -
DUO Traction Wheels
€12,51 - €20,02DUO Traction Wheels are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable set...