Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
45mm U Channels
$2.50 - $44.00REV 45mm U Channel has a 45mm x 45mm square profile, and is designed to work seamlessly with existing REV 15mm Extrusion. It can be used in locations where additional torsion strength is required. On... -
UltraUSB Hub and Cables
$4.00 - $25.00The UltraUSB Hub is designed specifically for use in competitive robotics, and gives you the ability to connect multiple USB devices to each other as well as replacing cables when damaged instead of... -
15mm Pillow Blocks
$5.00 - $7.75This bearing pillow block bracket (REV-41-1317) is used with the DUO Build System 15mm Extrusion. The 9mm center hole is use with either the Long Through-bore Bearing (REV-41-1329) or the End Cap... -
M3 Nylon Unthreaded Spacers
$3.25M3 Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts on a M3 bolt. -
M3 Stainless Steel Washer - 100 Pack
REV-41-2886-PK100$6.50Washer for use with REV DUO M3 hardware. -
M3 Ball Joint Rod Ends
$13.50M3 Ball Joint Rod Ends are compatible with the REV DUO System. The Female M3 Ball Joint Rod End (REV-49-1560) can either be paired with its male counterpart to create short linkage arms or with M3... -
5mm Metal Hex Bore Gears
$9.75 - $10.005mm Metal Hex Bore Gears are compatible with the REV DUO System and work with REV 5mm hex shafts in high-load applications. REV metal gears are NOT compatible with REV plastic gears. All REV metal... -
5mm Plastic Hex Bore Gears
$5.00 - $8.755mm Plastic Hex Bore Gears are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
DUO Plastic #25 Sprockets
$5.00 - $8.75DUO Plastic #25 Sprockets are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
15mm Plastic Motion Brackets
$4.00 - $6.0015mm Plastic Motion Brackets are compatible with the REV DUO System. Each bracket features a set of alignment ribs designed to seat the bracket into the extrusion channel increasing joint alignment,... -
DUO Flat Beams
$2.50 - $9.75DUO Flat Beams are compatible with the REV DUO System and are easy to use. Having an 8mm width, 3mm height, and 8mm hole pattern makes them perfect as a support for an upright or using them as a... -
USB Female A to Micro USB Adapter - Orange
REV-31-1807$7.75The USB Female A to Micro USB Adapter allows you to use standard USB devices with micro 5-pin oriented electronics. Use this cable adapter to connect a Robot Controller phone to an Expansion Hub, or... -
5.5mm WERA Nut Driver
REV-62-1866$12.50The 5.5mm WERA Socket Screw Driver is for use with M3 hex head screws and nuts. Kraftform Ergonomic Micro handle design features the shape that facilitates high torque transfer and precision feel for... -
Storage Tote - Orange
REV-41-1215$29.75Tote around your extra robot parts with the classic REV Storage Tote. This is the same tote included with the EDU Kit V2 and the FTC Starter Kit V3.1 as well as previous versions. Specifications ... -
Motion Pattern Spacer - 8 Pack
REV-41-1846-PK8$5.50This Motion Pattern Spacer offers a convenient and accurate way to space gears, sprockets, wheels, and other parts through the Motion Pattern interface. Great for getting the proper spacing when face... -
15mm Linear Motion Kit V2 Hardware Pack
REV-45-1831$7.75This is all of the hardware included in the 15mm Linear Motion Kit V2 (REV-45-1507). Specifications Hole Diameter: M3 Clearance Kit Contents QTY 8 - M3 x 8mm Low Profile Socket S -
JST PH 6-pin to JST PH 4-pin Encoder Adapter Cable - 50cm
REV-31-1815$4.50The JST PH 6-pin to JST PH 4-pin Cable allows for seamless connection of the Through Bore Encoder to the dedicated encoder ports on the FTC Control System (Expansion Hub or -
15mm Extrusion Slot Cover - 2m
$5.00These plastic 15mm Extrusion Slot Covers are ideal for making any machine look great! COLOR -
U Channel Endcap - 4 Pack
REV-41-1687-PK4$21.75The U Channel Endcap spans between the two sides of U Channel to provide holes on multiple surfaces to fasten additional components to. Also, using the endcap is a great way to strengthen longer... -
M3 x 10mm Nylon Patch Set Screw - 10 Pack
REV-41-1712-PK10$6.00These set screws have a pre-applied coating of nylon, helping them to stay in place under vibration. Use these with REV's standard Shaft Collars or new Slim Shaft Collars to never lose another shaft...