Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
M3 Stainless Steel Washer - 100 Pack
REV-41-2886-PK100€6,19Washer for use with REV DUO M3 hardware. -
5mm Hex Spacers
€5,71 - €7,375mm Hex Spacers are compatible with the REV DUO System and accurate way to space gears, sprockets, wheels, and other parts along a 5mm hex shaft. Mix and match various spacer lengths to adjust... -
M3 Ball Joint Rod Ends
€12,84M3 Ball Joint Rod Ends are compatible with the REV DUO System. The Female M3 Ball Joint Rod End (REV-49-1560) can either be paired with its male counterpart to create short linkage arms or with M3... -
5mm Metal Hex Bore Gears
€9,27 - €9,515mm Metal Hex Bore Gears are compatible with the REV DUO System and work with REV 5mm hex shafts in high-load applications. REV metal gears are NOT compatible with REV plastic gears. All REV metal... -
5mm Plastic Hex Bore Gears
€4,75 - €8,325mm Plastic Hex Bore Gears are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
DUO Plastic #25 Sprockets
€4,75 - €8,32DUO Plastic #25 Sprockets are compatible with the REV DUO System and fit on a 5mm hex shaft. The hex shaft interface completely eliminates the need for expensive hubs or using potentially unreliable... -
15mm Plastic Motion Brackets
€3,80 - €5,7115mm Plastic Motion Brackets are compatible with the REV DUO System. Each bracket features a set of alignment ribs designed to seat the bracket into the extrusion channel increasing joint alignment,... -
DUO L Beams
€2,38 - €14,50DUO L Beams are compatible with the REV DUO System and are a structural element for small load applications or as a supporting component on a larger load application. They are compact, lightweight,... -
DUO Flat Beams
€2,38 - €9,27DUO Flat Beams are compatible with the REV DUO System and are easy to use. Having an 8mm width, 3mm height, and 8mm hole pattern makes them perfect as a support for an upright or using them as a... -
3/4in Needle Bearing Carrier - 2 Pack
REV-21-2385-PK2€4,28The 3/4in Needle Bearing Carrier is compatible with the REV ION System and designed for use with the Needle Bearing - 3/4in ID to turn -
External Retaining Ring - 3/4in - 10 Pack
REV-21-2394-PK10€6,19The 3/4in External Retaining Ring is compatible with the REV ION System and is used to constrain movement on the Dead Axle Tube - 3/4in for intake and roller applications... -
Ratio Plates
€8,32Ratio Plates are compatible with the REV ION System. When you need a ratio other than 1:1, Ratio Plates make it easy to position sprockets and pulleys at the perfect center-to-center distance for the... -
USB Female A to Micro USB Adapter - Orange
REV-31-1807€7,37The USB Female A to Micro USB Adapter allows you to use standard USB devices with micro 5-pin oriented electronics. Use this cable adapter to connect a Robot Controller phone to an Expansion Hub, or... -
5.5mm WERA Nut Driver
REV-62-1866€11,89The 5.5mm WERA Socket Screw Driver is for use with M3 hex head screws and nuts. Kraftform Ergonomic Micro handle design features the shape that facilitates high torque transfer and precision feel for... -
Storage Tote - Orange
REV-41-1215€28,29Tote around your extra robot parts with the classic REV Storage Tote. This is the same tote included with the EDU Kit V2 and the FTC Starter Kit V3.1 as well as previous versions. Specifications ... -
Motion Pattern Spacer - 8 Pack
REV-41-1846-PK8€5,24This Motion Pattern Spacer offers a convenient and accurate way to space gears, sprockets, wheels, and other parts through the Motion Pattern interface. Great for getting the proper spacing when face... -
15mm Linear Motion Kit V2 Hardware Pack
REV-45-1831€7,37This is all of the hardware included in the 15mm Linear Motion Kit V2 (REV-45-1507). Specifications Hole Diameter: M3 Clearance Kit Contents QTY 8 - M3 x 8mm Low Profile Socket S -
4-pin JST PH to 4-pin roboRIO I2C Cable
REV-11-1729€3,80This 4-pin JST PH to 4-pin roboRIO I2C Cable is designed to connect REV I2C sensors, like the REV Color Sensor V3, to the I2C port on the NI roboRIO for use in the FIRST Robotics Competition. Each... -
JST PH 6-pin to 4 Channel PWM Encoder Adapter Cable - 1m
REV-11-1817€7,37The JST PH 6-pin to 4 Channel PWM Cable allows for seamless connection of the Through Bore Encoder into the FRC control system (roboRIO). -
JST PH 6-pin to JST PH 4-pin Encoder Adapter Cable - 50cm
REV-31-1815€4,28The JST PH 6-pin to JST PH 4-pin Cable allows for seamless connection of the Through Bore Encoder to the dedicated encoder ports on the FTC Control System (Expansion Hub or