Filter By
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
36in 2-Wire Jumper Cable
REV-11-1134€2,502-pin header cable that can be used for connecting signals, sensors or any other spots on robots. Features 2 female 0.1in pitch connectors on each end. Specifications Length: 91cm (36in) 2 pin... -
Molex Microfit+ Power and CAN Cable - 6in
REV-11-8020€5,71The Molex MicroFit+ Power and CAN Cable is the dedicated replacement and accessory cable for the MAXSpline Through Bore Encoder. It provides both power and CAN connectivity through a compact, secure... -
Digital LED Indicator - Red/Green - 4 Pack
REV-31-2010-PK4€13,51The Digital LED Indicator is a LED signal module that is digitally controlled (active low) and offers three colors: red, green, and amber. The Digital LED Indicator is designed to directly interface... -
Touch Sensor
REV-31-1425€8,01Touch sensor is best used for user input, but can also be used as a limit switch. Configuration The REV Touch Sensor is a digital sensor that is wired to the N+1 channel on our standard 4-pin JST PH... -
36in CAN Extension Cable - 5 Pack
REV-21-2052-PK5€11,51The 36in CAN Extension Cable is a 3-pin connector to interface with existing CAN devices. Specifications Length: 36in (3ft) Wire Colors: yellow, green 22 AWG -
JST PH 6-pin Breakout Board - 4 Pack
REV-11-1276-PK4€7,51This JST-PH 6-pin Breakout Board is designed to adapt external sensors to the SPARK MAX 6-pin Encoder Port standard. It features a JST PH 6-pin connector, labeled solder pads, and through-hole pads... -
PWM Cable Clip - 10 Pack
REV-11-1229-PK10€5,51These plastic clips are designed to keep standard 0.1" 3-pin PWM connectors together. Simply clip them around an assembled pair of connectors. -
NEO 2.0 Sensor Cable
REV-11-1287€4,75The NEO 2.0 Sensor Cable connects the NEO 2.0 Brushless Motor’s sensor port to a standard JST PH 6-pin interface used on REV motor controllers. The 2x3-pin PHSD connector provides a secure, latching... -
CAN Terminator Pack
REV-11-3324€6,66The CAN Terminator Pack provides two compact, plug-ready termination options for teams looking to maintain reliable CAN bus performance anywhere in their robot’s wiring. Each terminator uses a small... -
MAXSpline Grommet - 10 Pack
REV-21-3640-PK10€10,01The MAXSpline Grommet provides a simple way to route wires through MAXTube while preventing abrasion against bare aluminum. Made from pliable 60A rubber, it press-fits into the MAXSpline Bore on... -
Through Bore Encoder V2
REV-11-3174€48,05The REV Through Bore Encoder V2 provides precise, reliable shaft position measurement with both incremental (ABI quadrature) and absolute (pulse-width) outputs. Its ½" hex through bore mounts easily... -
SPARK MAX Data Port Breakout Board
REV-11-1278€11,01The SPARK MAX Data Port Breakout Board makes it easy to connect external sensors to the SPARK MAX Data Port. For additional information on the SPARK MAX Data Port, please take a look at the SPARK MAX... -
ATO Auto-resetting Breakers
€24,02REV Robotics custom ATO sized auto-resetting breakers are designed to give reliable protection for FRC robot actuators. These custom developed breakers adhere to SAE Standard J553 and will give... -
Servo Hub
REV-11-1855€80,08The REV Servo Hub is compatible with both the REV ION and REV DUO systems. Over a single communication interface it can provide advanced control of up to six (6) servos. This means that the Servo Hub... -
SPARK MAX Mounting Bracket - 2 Pack
REV-21-2468-PK2€6,01Mounting your SPARK MAX Motor Controller (REV-11-2158) has never been easier with the help of the SPARK MAX Mounting Bracket. Configured with a hole pattern compatible with a 1/2in grid and allowing... -
SPARK CAN Cable V2 - 2 Pack
REV-11-1880-PK2€5,51This update to the SPARK CAN Cable bridges the H and L CAN signals together within the cable itself. This prevents the CAN Bus breaking in the event of a cable disconnecting from a SPARK MAX Motor... -
2m Distance Sensor
REV-31-1505€29,03The REV Robotics 2m Distance Sensor uses the ST Microelectronics VL53L0X Time-of-Flight (ToF) laser-ranging module to measure distances up to 2 meters with millimeter resolution. Unlike other ranging... -
Magnetic Limit Switch
REV-31-1462€16,02The REV Robotics Magnetic Limit Switch is a three-sided active-low digital hall effect switch with three internal hall effect elements located on the top and sides of the sensor. The three elements... -
JST PH 6-pin Extension Cables
€4,00 - €16,02These JST PH 6-pin Extension Cables are intended to extend the reach of sensor cables without having to cut and splice wires. Specifications REV-11-1275-PK4: Length: 90cm (35... -
Analog Pressure Sensor
REV-11-1107€36,54The REV Robotics Analog Pressure Sensor is a 5V sensor that can measure pressures up to 200 PSI. It outputs an analog voltage that is proportional to the measured pressure and can plug directly into...